Wilwood Master Cylinder 1-1/8" Bore Black E-Coat

Wilwood’s Tandem Aluminum Master Cylinder features a 1-1/8” bore size and a black e-coat finish for a long lasting great look!  The 1-1/8” bore is designed for use primarily with power brake applications, and works well with either vacuum boosters or hydroboost systems.  The stroke is set at 1.10” with a volume ratio of 2:1 between the primary and secondary chambers.  

Machined from high-pressure aluminum die castings, each master cylinder weighs only 3lbs, a 75% weight savings over most cast iron OE type master cylinders.  Not only are these great at stopping your rig, they will also help dress up the engine compartment! 

This master cylinder can be used with disc / disc applications, or with disc / drum applications (a 10lb residual pressure valve is recommended to be installed within 12" of the master cylinder for disc / drum applications for maximum line pressure within the system). 

Front reservoir feeds front brakes, rear reservoir feeds rear brakes.

 

 

• Fits All with 1-1/8" bore master cylinders
• Black E-Coat Finish
• New (Not Rebuilt)!
• Cap Included