â–¡
Skip to main content

Free Shipping on every order over $50 in the Lower 48

and pay NO Sales Tax!


BJ's Full-Size Jeep Parts

(6)

Tailgate Window Switch Conversion Kit 1963-1991

$98.00
Part Number:
11-2032-A
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Have a Question? Ask a product expert! Call or Text 253-320-7604

Product Details

BJ's Off-Road is proud to announce our Tailgate Window Switch Conversion!

We had a bracket built to adapt a military grade switch to your factory tailgate rocker switch bracket! This switch is very high quality and should outlast the stock switch!

Our switch also retains all interior switch functions!

Note that this switch replaces the one inside the tailgate (not the dash).

Kit Includes:

  • Switch Adapter
  • Switch - Waterproof Military Grade
  • Screws and Lock Rings
  • Ring Terminals with Heat Shrink Sleeves
  • Window Lifter Clips (pair)
  • 6-inch Piece of Wire
  • Instructions

OEM Part Numbers: 8556003167 56003167 J8556003167 j56003167

**Note: you will reuse the original switch bracket, and our conversion kit mounts to that.

 

 

  • Fits 1963-1983 Wagoneer
  • Fits 1984-1991 Grand Wagoneer
  • Fits 1974-1983 Cherokee
  • Dash Switch for 1973-1985 Models Available HERE!
 


Reviews (6)

  • Great
    5

    Posted by Cody Canon on Apr 15th 2024

    Works great. Easy to install. Great instructions. Much better and heavier duty than OEM. I would highly recommend upgrading to this product to anyone who is working on their tailgate.

  • great kit, make sure to have a friend to help
    5

    Posted by Rett on Nov 13th 2021

    for my 1977 Wagoneer, the orange wire in the installation instructions is actually red with white trace. Also, the brown and tan wires need to be reversed from what is it in the instructions to make sure dash switch works correctly, which it did after I installed this kit. Also, you will need to really crimp the connectors very hard, and in order to get the two red with white trace power wires and the black jumper wire in the same connector, you will need to cut off about 20% of the stands so that they all fit in the crimp connector. since you are taking all of the parts off, it is a good time to lube the gears and tracks. I found it a good idea to use a 2" hole saw over make a hole near the bottom of the inner tailgate to allow easy access to the spring clips that retain the steel part of the glass frame to each of the regulator arms. Also, I was not able to install the replacement spring clips, as the spring steel is too stiff, but you can get replacements that are as thin as the originals at any Ace or True Value.

  • Crawdad
    5

    Posted by Dan on Sep 17th 2021

    Excellent instructions. Was able to sort out all the cut wires in my butchered tailgate using your instructions....great job

  • Must have if rebuilding
    5

    Posted by Michael on Aug 22nd 2021

    I bought this because my key switch never worked and knew when I rebuilt the tailgate I’d need to install it. Super easy install, instructions are clear.

  • Mr
    5

    Posted by Zachariah Oeding on Sep 3rd 2020

    After failure of the original switch I discovered this upgrade solution. Excellent!! Comes with detailed step-by-step description to install. However quite a lot of work to get to the switch, but absolutely worth it.

  • 83 Cherokee NT
    5

    Posted by Robert on Aug 12th 2018

    The hardest part about installing the Tailgate Switch Conversion Kit is getting to the switch assy itself. After that it was very simple to remove the old switch and install the new set up. Great directions on the wiring. I am very happy. My old bust tailgate switch must have been causing a open connection to the dash switch cuz after the tailgate Switch Conversion Kit was install the dash switch worked as designed. Great product.