Replacement tailgate window lift pins! These replace the worn out lift pins on the tailgate window regulator arms that the tailgate window lifter channel connects to. If you've ever tried to install the lifter channel clips in the tailgate, you know how frustrating (and damaging to your arm skin) they can be. This not only fixes worn out / rusty factory pins, but also gives you a retainer clip that slides on from the side. That means no more having to install the clips blind and have them pop off shift / etc during installation.
These are also great since it upgrades the clip design and you can easily take the clips on and off and they are reusable!
The pin has a shoulder to retain your factory spring and spring cup (spring and spring cup not included).
- Made in the USA
Great overall design, however they fit the Chanel very loose and cause significant rattling… to solve this you need a spacer to slip over the new shaft and grind it to fit the Chanel of the window bracket tight, then add some grease and assemble… I would recommend plastic spacers so as they wear in they wont make as much rattling noise… I feel these should be included in the kit.. Used with the BJ’s stainless brackets…
These clips eliminate a significant amount of time and swearing when I work in the tailgate!
Super easy instal, if you are doing the tailgate this is a must have as I had lots of in and out with the glass and rest fitting. As mentioned, I agree that it would be great if it came with the washer and spring
So much easier using these. I needed to dry in my body but still be able to repair tailgate at a later date and these made it a snap to remove or replace my glass as needed.