Product Details
Dakota Digital Temperature Module Expansion Sending Units (For Those That Already Ordered The Expansion Unit Itself)
These are the sending units required for the BIM-04-2 temperature module, which allows you to display an additional temperature reading within your RTX, HDX, VHX or VFD3 gauges. The BIM-04-2 utilizes Ground Isolated senders for easy installation without the headache of engine ground deficiencies.
Temperature Inputs:
- Temperature (generic fluid)
- Water Temp
- Oil Temp
- Transmission Temp
- Differential Temp
All temperature readings will display either Fahrenheit or Celsius depending on the setting selected by the gauge cluster.
**Note: a sending unit is required for each input you wish to display (up to 5 sending units). Select the number of sending units you want in the pull-down menu. For the transmission temperature, if your transmission does NOT have a test port (threaded port in the fluid circuit) or a port in your pan, you can select one of the Inline Transmission Temperature Sender Blocks in the pull-down menu (5/16 or 3/8) which you will install inline with your transmission cooling lines, in the output line.
**Note: The BIM-04-2 is designed to supply information to the compatible Dakota Digital VHX, HDX, RTX and VFD3 instrument systems that have the black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity.
***The BIM-04-2 Supersedes the BIM-04-1
- Fits:All VHX, HDX, RTX and VFD3 instrument systems with the black plastic control module
- Note:These Sending Units are ONLY for those that already have the expansion module
Reviews (0)
There are currently no reviews for this product. Please write a review by clicking the button below.