Aluminum Crossflow Radiator V8 SBC / BBC Engine Conversion 1972-1991

New bolt-in aluminum crossflow radiators! The crossflow design has two 1-inch rows which offers better coolant flow and more cooling capacity than 4-core radiators. These radiators are available with a built-in automatic transmission cooler (select from the pull-down menu). These are fully welded (no epoxy, glue or gaskets).

These are designed for FSJ's with a Small Block Chevy or Big Block Chevy Engine Swap.

Top Hose will be on the driver side and the Bottom Hose will be on the passenger side.  Top Hose is 1.5" and Bottom Hose is 1.75" -- Custom options available.

Note: transmission cooler lines relocated to driver side (longer flexible transmission cooling hose required)

Note: we recommend the use of Teflon applied to the transmission cooler fittings, but DO NOT use Teflon Tape, as it can bind and ruin the aluminum threads of the cooler. You should use liquid Teflon Tape instead.

Note: Stock Fan Shroud will not work with this radiator without modifications.

Images are for Illustrative Purposes Only.  Actual port location will vary based on your configuration.

Note: Black paint is a 2-part epoxy coating that holds up really well on aluminum. It does not help or hurt the cooling in any way

• Fits 1972-1983 Wagoneer
• Fits 1984-1991 Grand Wagoneer
• Fits 1974-1983 Cherokee
• Fits 1972-1988 J-trucks
• Models All with Small or Big Block Chevy Engine Conversions
• Direct Bolt-in
• 22-inch Wide Core
• 3.5-inch Width
• 16 Fins per Inch
• Transmission cooler and petcock are 1/4-inch NPT threads
• Click here for a bolt-on electric fan and shroud kit!
• Each unit is made to order, allow 4-5 weeks for shipment
• Made in USA with USA made cores!