Skip to main content

Free Shipping on every order over $50 in the Lower 48

and pay NO Sales Tax!


BJ's Full-Size Jeep Parts

(2)

Dozer I Front Bumper

$850.00
Part Number:
26-5500
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Have a Question? Ask a product expert! Call or Text 253-320-7604

Product Details

Dozer I Custom Front Bumpers! These bumpers are all steel with D-shackle mounts and various options available. They mount in original locations and have added structural reinforcements and cross-members. You can pull the boilers out of hell with these bumpers (not actually confirmed).

**NOTE: This Bumper is Made To Order, and can take approximately 3-6 weeks before shipping out.
 
 
 
  • Fits 1963-1983 Wagoneer
  • Fits 1984-1991 Grand Wagoneer
  • Fits 1974-1983 Cherokee
  • Fits 1974-1988 J-10 / J-20
  • Winch Plate Option
  • Receiver Hitch Option
  • Integrated Recovery Points Included in Base
  • Minimal drilling required
  • Can be built to accommodate 0"-3" Body Lifts
  • Made EXCLUSIVELY for Full-Size Jeeps
  • Tapered Ends
  • D-Ring Shackle Mounts Standard (Shackles are not included)
  • Comes Bare Steel
  • Each Bumper is Custom-made to order


Reviews (2)

  • Not a serviceable design
    3

    Posted by Rusty Spooner on Apr 5th 2020

    Though I really like this bumper, and for the most part it was very easy to install, and is as I expected. Except for one area. The design of the mounting plates on the bumper itself make it almost impossible to replace the bolts if the fail or need to be replaced. There is no clearance to insert a new bolt between the backside of bumper, and the flat mounting plate. In my particular experience I was not even able to insert the bolt from the other side, and slip the nut and lock washer between the mounting plate and back wall of the bumper. Taking a grinder to a freshly powder coated part is painful to say the least. I have to say was very temped to spend the $$ on a nutsert tool, and put 1/2' nutserts into the bumper backside wall. For this reason, I cannot give this product a rating higher than 3 starts.

  • 86 Jeep Grand Wagoneer
    5

    Posted by Jonathan on Jun 27th 2017

    I purchased this Dozer I front bumper with hitch and winch options for my 86 Jeep Wagoneer. Awesome! I also purchased a Cliffhanger rear bumper with hitch, rear tire swing arm with jack mount. I'm incredibly happy with these bumpers. I took these to a powder coat shop here in STL that has been open forever and the guy kept raving about how well built these bumpers were. He commented on how they used the best materials and the welds were clean and strong. He said more than once that he sees a lot of junk through his shop and whoever built these knew what they were doing. The front bumper brackets use existing holes and are very intuitive! The strength of the brackets and bumper greatly increase the integrity/safety of a front end collision over factory. The rear bumpers do not use any existing holes and require measuring, and drilling a lot of holes but is just as solid. Also posting a review on the Cliffhanger rear bumper. I preferred the look of the Dozer front bumper and Cliffhanger rear bumper and they look great together on my jeep!