Skip to main content

Free Shipping on every order over $50 in the Lower 48

and pay NO Sales Tax!

(0) Write a Review

Dakota Digital Cruise Control for GM LS Drive-by-Wire Engines

Calculated at Checkout

Have a Question? Ask a product expert! Call or Text 253-320-7604

Product Details

Direct plug-in cruise control for GM LS drive-by-wire engines, the CRC Series plugs directly into your OEM LS throttle pedal for not only simple installation, but reliable operation and connectivity.  Self-learning calibration makes this system a snap to use, with no DIP switches or charts to follow!

The CRC-1000 obtains its information from the included diagnostic connector and throttle pedal connections, allowing an extremely simple installation for drive-by-wire GM CAN bus applications.

The CRC-1000 is ideal for applications using all matched OEM drivetrain control components.

The CRC-2000 variation features a discrete VSS input (fixed 4,000 PPM, your application may require the use of an SGI-100BT if a 4,000 PPM signal is not present), usable when a diagnostic connector is unavailable.  While still plugging directly into the throttle pedal in these LS-based systems, the CRC-2000 provides a flexible approach, perfectly suited to cases with a mixture of LS-based OEM and specific aftermarket powertrain control components.

Both the CRC-1000 and CRC-2000 fit:

  • 2005-2013 Corvette
  • 2008- up GM Full Size Truck/Van/SUV with throttle pedal contain inline 6-pin connector
  • 2010-2015 Camaro
  • 2008-2010 Pontiac G8 GT (verify pedal connector type first)
  • GM Connect & Cruise packages

* Does not fit Pontiac GTO or Holden applications

** Neither the CRC-1000 or CRC-2000 are considered universal cruise control packages, their proper operation can only be expected when interfaced with the LS-based applications outlined above.  Any ECM speed calibration, or software updates which have affected the pedal specifications may prevent the CRC-1000 or CRC-2000 from functioning.

Your choice of switch/turn signal lever is supplied. Inputs for power, ground, and a connection to your existing brake light switch are all that is required (along with VSS input on CRC-2000). Additionally, an output is provided for a cruise-on indicator.

Module measures 3.5" x 3.5" x .75"

* 1986-1991 FSJ's can use their factory handle!

  • Fits All with GM LS Conversions Listed Above

Reviews (0)

There are currently no reviews for this product. Please write a review by clicking the button below.