Rear Window Defrost Switch Bezel

Rear Window Defrost Switch Bezel

Replace your broken Defrost switch bezel with this new aftermarket version.  These new bezels have an improved design that replaces the 3 plastic push-in tabs with a snug fit nut for installation, meaning the bezel will no longer walk around on the painted dash surface. Made from heat and UV resistant Black ASA plastic.

Easily painted to match your application!  To prep the parts, lightly scuff or sand the surface, then clean with denatured alcohol or something similar (avoid heavy acetone use as it can melt the plastics).  Then paint, dye or wrap as you wish. 

Included is the bezel and plastic, 3 acrylic sight glass options (will need to install and epoxy in your choice of colored sight) and nut to secure the bezel to the dash.  Note: defrost switch assembly not included

Installation of the acrylic lens should be done after painting and secured with glue or epoxy. Removal of the switch is necessary to install the switch bezel, disconnecting the battery is a good practice during this installation. Using a 1" socket on the plastic nut to get it snug may be useful in this installation, do not over tighten the bezel nut.

 

 

• Fits 1974-1983 Wagoneer
• Fits 1984-1985 Grand Wagoneer
• Fits 1974-1983 Cherokee
• Models All with Defrost
• Plastic Construction
• USA Made