Rancho RS9000XL Shock Set of 4

Rancho RS9000XL Shock Set of 4

These Rancho RS9000XL shocks feature a large-diameter 18mm rod housed in a 2.75 in. diameter body for maximum reliability. They feature a liquid metal finish, a 9-position adjustment knob to make changes for the road conditions you're driving on and red polyurethane bushings for consistent performance.

The Rancho RS9000XL shocks also include a red protective boot to keep dirt, dust, and particles away from the internal pieces of the shock absorbers.

When measuring for new shocks, you need to measure between the upper and lower shock mount on the chassis itself, center of bolt on the top to center of bolt hole on the bottom.  This is called 'Static Ride Height Measurement'.  This needs to be measured at the position where the shock you are ordering will be installed (front, rear or both).  Do NOT measure the existing shock, as that may be incorrect for your ride height.  Measuring at the chassis mounts is the best / safest way to get the right shocks each and every time.  Contact us with any questions.

**Note: Twin Tube Shocks are designed to be mounted with the Body Down and Boot Up.  This is because Twin Tube shocks have valving that must stay submerged in the charge fluid.  Running them with the Body UP and Boot Down will cause that valving to dry out and the shock will fail and isn't covered under warranty.

 

 

 

• Fits All Full Size Jeeps
• Note Longer Shocks Go Up Front, Shorter Shocks Go In Rear
• Tri-tube, mono-flow design ensures exceptional performance under a full range of load and temperature conditions
• 9-position adjustment for desired performance; for off-road, street or anything in between
• Cellular gas design
• Graphite-impregnated Teflon® band for smooth, reliable performance
• Double welded loops with red urethane bushings
• 18 mm hardened rod double-chromed for long wear
• Red Boots Included
• Limited Lifetime Warranty
• Sold in Sets of 4
• Made in the USA!