Rancho RS5000 Shock Each

Rancho RS5000 Shock, sold individually.

The Rancho RS5000 High-Performance Shock Absorber with Twin-tube cellular gas design and ten-stage valving delivers a comfortable highway ride and superb off-road performance. It provides exceptional performance on either stock or raised vehicles.

The shocks are covered by Rancho's Limited Lifetime Warranty.

When measuring for new shocks, you need to measure between the upper and lower shock mount on the chassis itself, center of bolt on the top to center of bolt hole on the bottom.  This is called 'Static Ride Height Measurement'.  This needs to be measured at the position where the shock you are ordering will be installed (front, rear or both).  Do NOT measure the existing shock, as that may be incorrect for your ride height.  Measuring at the chassis mounts is the best / safest way to get the right shocks each and every time.  Contact us with any questions.

**Note: Twin Tube Shocks are designed to be mounted with the Body Down and Boot Up.  This is because Twin Tube shocks have valving that must stay submerged in the charge fluid.  Running them with the Body UP and Boot Down will cause that valving to dry out and the shock will fail and isn't covered under warranty.

 

 

 

• Fits All Full Size Jeeps
• Note Longer Shocks Go Up Front, Shorter Shocks Go In Rear
• Twin-tube cellular gas design
• Ten-stage velocity sensitive valving delivers a comfortable highway ride.
• Provides exceptional performance on either stock or raised vehicles
• Double welded mount
• Expanded tube design for increased fluid capacity and reduced internal temperatures
• 1-3/8-inch diameter full displacement piston
• Glass-filled Teflon® piston seal
• Internal rebound bumper
• 5/8-inch diameter hardened & double-chromed rod
• 240-hour salt spray resistant finish
• Shock bushings included
• Red Shock Boots Included
• Limited Lifetime Warranty
• Sold Individually