Edelbrock 1901 AV2 Series 500 cfm Carburetor With Electric Choke, Satin Finish (Non-EGR)

The Edelbrock #1901 AV2 Series 500 cfm Carburetor With Electric Choke, Satin Finish (Non-EGR) is designed and calibrated for small cubic-inch single carb applications, and match well with an Edelbrock Performer 2131 Non-EGR manifold.

Includes both timed and full vacuum ports for ignition advance. This carburetor is calibrated for single-quad applications.

With a two-piece design, these carbs are easy to adjust and upgrade internal parts without having to remove the carb from the manifold. Each carb is set at the factory and rarely need adjustments, meaning you can bolt it on and drive right out of the box!

Features Include:

• 4 Barrel
• Square Flange
• Satin Finish
• Primary Bore 1.44; Secondary Bore 1.6875
• Primary Jet Diameter 0.095
• Secondary Jet Diameter 0.095
• Metering Rod Size .070 x .052 in
• Main Venturi Diameter 1.19
• Body Height 3.25
• Spring Force 5" Hg (Orange)
• Gasket Or Seal Included Yes
• Annular Type Booster
• Non-EGR

 

**NOTE: Edelbrock carburetors are not calibrated for or compatible with alcohol, race or E85 pump fuel. The use of alcohol or E85 in your Edelbrock carburetor will damage your carburetor and void your warranty. The use of a new fuel filter between the fuel pump and carburetor is required. Failure to do so will void the manufacturer's warranty of the carburetor.

 

 

• Fits All with Edelbrock Performer Intake Manifold
• Aluminum housing (dissipates heat faster)
• Factory tuned
• Two-piece design
• More power & reliability
• Prefect for stock or mild-built AMC's
• Will not fit on stock intake manifold, must use Edelbrock Performer Manifold
• Linkage adapter required: LINKAGE ADAPTER