Aluminum Crossflow Radiator Engine Conversion Custom Hose Locations 1972-1991

Customizable Aluminum Radiator for your Full-Size Jeep.  If our off-the-shelf radiators don't fit your build, this is what you need.  We can do any hose locations, any sizes (within reason), AN Fittings, etc. 

All made to bolt into a 1972-1991 Full-Size Jeep, and only fit the V8 core supports.

New bolt-in aluminum crossflow radiators! The crossflow design has two 1-inch rows which offers better coolant flow and more cooling capacity than 4-core radiators. These radiators are available with a built-in automatic transmission cooler (select from the pull-down menu). These are fully welded (no epoxy, glue or gaskets).

Notes:

• Transmission cooler lines relocated to driver side (longer flexible transmission cooling hose required).
• We recommend the use of Teflon applied to the transmission cooler fittings, but DO NOT use Teflon Tape, as it can bind and ruin the aluminum threads of the cooler. You should use liquid Teflon Tape instead.
• Stock Fan Shroud will not work with this radiator without modifications.

 

Steam Port is included with plug to block it if you're not using one.

Images are for Illustrative Purposes Only.  Actual port location will vary based on your configuration.

These are Made To Order, and take approximately 3 weeks to build before shipping (sometimes they are available faster).

**NOTE: There is a difference between V8 Radiator Core Support Width and Straight 6 Radiator Core Support Width.  You MUST verify before ordering, as our aluminum radiators are based on and ONLY FIT the V8 core support width. 

• V8 Core Support Mounting Holes are approximately 29.41" across, Original Tank was Approximately 26.82" wide
• Straight 6 Core Support Mounting Holes are Approximately 26.16" across, Original Tank was Approximately 24.5" wide

 

 

• Fits 1972-1983 Wagoneer
• Fits 1984-1991 Grand Wagoneer
• Fits 1974-1983 Cherokee
• Fits 1972-1988 J-trucks
• Only Fits V8 Core Support
• Direct Bolt-in
• 22-inch Wide Core
• 3.5-inch Width
• 16 Fins per Inch
• Transmission cooler and petcock are 1/4-inch NPT threads
• Click here for a bolt-on electric fan and shroud kit!
• Made in USA with USA made cores!